• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

ArborElectro Impedance Tomograph

 

The ArborElectro Impedance Tomograph is able to detect the size and location of active fungi attacked regions in the trunk non-destructively. It works based on electric resistivity measurements between several sensors around the trunk. The basic measurement principle is that resistivity increases/decreases if there is a change in the concentration of ions between two sensors. Fungi attacks even in very early stages can be determined.

 

Usage Instruction

  1. Place the resistivity meter onto the tree.
  2. Measure the circumference and decide the proper shape (circular, elliptic or irregular). Place the electrodes onto the tree at the proper positions or measure their positions. Enter the data to the computer.
  3. Start the measurement on the computer. During the measurement do not touch the tree. Do not measure other conditions parallel to the resistivity measurement.
  4. Choose triangulation parameters and run the iterations. The program will calculate the resistivity map of the selected cross section.


Feature

  • GeoPic-32 Multielectrode Resistivity Meter
  • LEMO-USB connection cable (with 4 needles) to connect the Multielectrode Resistivity Meter to computer
  • LEMO-USB charger cable (with 3 needles) to charge the Multielectrode Resistivity Meter
  • 4 pcs. electrode connecting cable with 8 crocodile clips on each
  • Cable
  • 50 pcs. stainless steel needles (as electrodes) for measurements; diameter: 1.5 mm, length: 63 mm
  • Steel hammer
  • 5 pcs. screws to fix the Multielectrode Resistivity Meter onto the tree
  • Electrode remover tool
  • Case

 


Spesification

Excitation voltage 5-50V, adjustable in 5V steps

Current measurement range 0-20mA; 0-400µA; 0-40µA

The length of one basic measurement 640ms

Amplifications 1, 5, 20, 100

Inbuilt divider 1:10

Power supply Built in 5V/5000mAh Li-ion Power Bank

Continuous operation time * Approximately 2 hours

Total weight ** 6 kg

PC connection LEMO-USB cable or Bluetooth

Total measurement time of one tree *** 45 minutes

Operating temperature range 0-40 °C

*on average diameter trees

**without PC, including case, hammers

***one section, including assembly, geometry registration, measurement

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk ArborElectro Impedance Tomograph


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji