• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

AU - 2003 Beating & Freeness Tester (Canadian Type)

 

This instrument is used for determination of freeness of wood fibre ground wood and mechanical pulp. It measures the Canadian Freeness numberwhich is a measurement of the drainage capacity of different pulp types

It is a useful index of the amount of mechanical treatment given to the pulp With standard screen plate and Plexiglas measuring cylinder for CSF value.

3 grams of OD fibre pulp in aqueous suspension is drained through the fibre mat on a standard perforated screen plate during the test into a funnel provided with a bottom and side orifice. 

The filtrate collected in specially graduated measuring cylinder from the side orifice is expressed as a CSF value corresponds to milliliter.



Spesification

SPECIFICATIONS

Its Nozzle and screen plate are calibrated according to relevant standards. Two measuring cylinders are included.

Capacity of the cylinder

: 1000 ml above the screen plate

The Volume in the Bottom
section of the cone

: 23.5 ± 0.2ml (adjusted by means of
   the threaded plug in the side orifice)
   Any change in this volume may
   affect the calibration.

Slope of the main cone

: 29o ± 5 min.

Orifices provided in funnel

: Two, one at the bottom & other on the side.

Distance between the overflow
lip of the tube (inside the funnel)
and bottom of the funnel section

: 50.8 mm ± 0.75 mm
   Note: This is extremely critical and
   set precisely at the works.

Size of the perforations in the

: 0.51±.01 mm diameter and no of
   holes are 97 per/cm2 screen plate
   (TAPPI STANDARD)

Compliance to the following
   International Standards

: ISO 5267/2
   CPPA C1
   BS 6035/2
   TAPPI T 227

Option
Spare screen plate
Wall mounted model.
Consistency determination appratus
 

Shipping Data

Ordering Data

 

Net Weight

Model No.

 

Gross weight

Voltage

 

Dimension

Frequency

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk AU - 2003 Beating & Freeness Tester (Canadian Type)


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji