• Alat Uji
  • sales@alatuji.com

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0813 1066 1358
    0812 9595 7914
  • 0812 8333 5497
    0878 7867 0721



The OM-CP-BRIDGE110 is a miniature battery powered, stand alone, bridge/strain gage data logger. The OM-CP-BRIDGE110 features a real-time clock module that extends the battery life to more than 10 years (15 minute reading rate at 25°C) and allows for high speed downloads. This is an all-in-one compact, portable, easy-to-use device that will measure and record up to 32,767 measurements. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The OM-CP-BRIDGE110 makes data retrieval quick and easy. Simply plug it into an available COM port and our user-friendly software does the rest. The software converts your PC into a real time strip chart recorder. Data can be printed in graphical or tabular format and can be exported to a text or Microsoft Excel file.


Input Connection: 6-position removable screw terminal 

Input Impedance: 1 Mduring acquisition, low impedance when inactive
Reference Voltage Output: 2.5 Vdc, 2.5 mA (1 k) maximum load
Maximum Input Signal Impedance: 5 k (350 .sensors may be used with series resistors toproduce >1 K; 120 .gages may be used in half and quarter bridge configurations)
Temperature Effect on Span and Offset: <25 µV over -40 to 80°C
Engineering Units: Stored in device, user may define any desired scale and Offset from ±1.000E-31 to ±9.999E+31
Start Time: Start time and date are programmable through software up to six months in advance
Real Time Recording: Device may be used with PC to monitor and record data in real time
Memory: 32,767 readings
Recording Interval: 1 reading every 2 seconds to 1 every 12 hours
Calibration: Digital calibration through software
Calibration Date: Automatically recorded within device to alert user when calibration is required
Battery Life: 10 years at 15 min reading rate, 25°C
Power: 3.6 V lithium battery included
Data Format: Date and time stamped, %, ppm; e, µe, V, mV, µV engineering units specified through software
Time Accuracy: ±1 minute per month at 20°C to 30°C)
Computer Interface: PC serial, RS-232C COM or USB (interface cable required); 56,600 Baud
Software: XP SP3/Vista and 7 (32 and 64-Bit)
Operating Environment: -40 to 80°C (-40 to 176°F) 0 to 95% RH non-condensing
Dimensions: 42 H x 68 W x 20 mm D (1.7 x 2.7 x 0.8")
Weight: 60 g (2 oz)


Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :


Tidak ada video untuk produk ini


Download PDF

Artikel Terkait dengan Produk OM-CP-BRIDGE110-10





Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)


Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)


Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)


Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji