Keunggulan Produk Universal Testing Machine TIME

Universal testing machine merupakan alat pengujian yang menggunakan teknologi yang berfungsi untuk menguji tegangan tarik (tensile test), uji kelenturan (bend test), ataupun uji kekuatan tekan (compress test) pada material atau bahan. Material atau bahan yang di uji meleputi material yang berbahan keras hingga lentur seperti besin, baja, kayu, karet, metal, beton dll. Universal testing machine dikenal dengan sebutan universal tester atau material test frame.

 

Shijin adalah perusahaan ternama yang berlokasi di China – Shanghai yang telah bekerja sama dengan kami sejak 10 tahun terakhir. Produk Shijin ini memiliki teknologi tinggi dengan menggunakan mesin yang akurat menjadikan pengukuran lebih tepat dan cepat. Shijin merupakan produk yang memproduksi berbagai alat pengujian seperti universal testing machine, friction and wear testing machine, electronic creep tester, dan masih banyak lainnya.

 

Universal testing machine dari Shijin adalah produk yang unggulan yang memiliki 2 varian yakni hydraulic universal testing machine dan electronic universal testing machine. Kedua dari universal testing tersebut memiliki fungsi yang sama yakni sebagai pengujian tekan, kelenturan, dan juga tarik, hanya saja kedua alat tersebut memiliki cara kerja yang berbeda. Berikut perbedaan pada kedua alat universal testing machine.

 

Hydraulic Universal Testing Machine

Hydraulic universal testing machine adalah alat pengujian yang sudah dijelaskan di bagian atas, tetapi alat ini bekerja dengan menggunakan bantuan oli sebagai kekuatan pengujiuannya. Kelebihan menggunakan hydraulic universal testing machine ini adalah dapat menguji kekuatan pada material yang berukuran besar dan memiliki daya tekan atau tarik yang kuat, hanya saja produk hydraulic universal testing machine ini terbilang lebih mahal dari pada electronic universal testing machine.

 

Electronic Universal Testing Machine

Electronic universal testing machine adalah alat pengujian yang sama dengan hydraulic universal testing dan sesuai dengan namanya electronic, alat ini bekerja dengan menggunakan electronic yaitu pengujian dilakukan tanpa menggunakan oli seperti hydraulic universal testing machine. Kelebihan menggunakan electronic universal testing machine ini adalah tidak perlu menggunakan oli sebagai penggujian karena sudah menggunakan electronic dan harganya pun lebih murah dari hydraulic universal testing machine. Electronic universal testing machine tidak dapat menguji benda atau material yang berukuran yang besar karena electronic yang digunakan tidak sanggup untuk melakukan pengujian tekan ataupun tarik.

 

Baik electronic ataupun hydraulic keduanya memiliki kelebihan dan kekurangan oleh karena itu alat ini digunakan hanya untuk berkebutuhan khusus jika yang diuji adalah material yang berukuran besar sebaiknya menggunakna hydraulic universal testing machine dan sebaliknya jika material yang di uji menggunakan material yang kecil sebaiknya menggunakan electronic universal testing.

 

Berikut contoh produk beserta penjelasan dari electronic dan hydraulic universal testing machine.

 

Hydraulic Universal Testing Machine

 

WEW-1000A Microcomputer Screen Display Hydraulic Universal Testing Machine

WEW-1000A computer screen hydraulic universal testing machine is based on national standards GB / T16826 - 1997 , "electro-hydraulic Universal Testing Machine" design production, primarily for metal tensile, compression, bending, bending, etc. Testing, adding simple accessories and devices, and testing wood, cement, concrete, rubber, and their products.

 

The main engine adopts the upper structure of the cylinder, the stretching space is located below the main machine, and the compression and bending test space is located between the cylinder block and the work table above the main machine, and the tensile test space is adjusted by the movement of the lower jaw seat. The sample is clamped hydraulically.

 

The force measuring mechanism uses the oil pressure sensor to measure the force, and uses the microcomputer screen display system independently developed by the company to display the test force, peak value, deformation and various test curves, and can print various test reports. (more info)

 

WEW-100 microcomputer screen display hydraulic universal testing machine

WEW-100 microcomputer screen display hydraulic universal testing machine is mainly used for tensile, compression, bending, shearing and other tests of metal materials, adding simple accessories and devices, and also for wood, cement, concrete, rubber and their products. experimenting. The main engine adopts the upper structure of the oil cylinder, the stretching space is located below the main body, and the compression and bending test space is located between the oil cylinder seat and the lower jaw seat above the main machine, and the tensile test space is adjusted by the movement of the lower jaw seat. The force measuring mechanism adopts the sensor force measurement, and uses the microcomputer screen display system independently developed by the company to display the test force, peak value, deformation and various test curves. It can print various test reports (requires special customization), and the user can edit the test by himself. The format of the report. (more info)

 

 

Electronic Universal Testing Machine

 

WDW-T100 microcomputer control electronic universal testing machine

The 100KN desktop microcomputer control electronic universal testing machine is a new type of precision mechanical testing equipment. The test machine is a bench-top structure that can be placed on a simple workbench. The main engine is driven by the servo motor to realize the up and down movement of the beam, and complete the mechanical properties tests such as stretching, compression, shearing and puncture of metal and non-metal materials.

 

In terms of control, the F020 and F038 controllers are installed in an electrical control cabinet that is side-mounted on the right side of the host. Through it, the control cabinet and the computer can independently control the test operation of the host. The control cabinet uses a liquid crystal display to test The test data can be displayed on the screen in real time during the process.

 

This product can be widely used in the mechanical properties of tensile, compression and bending of metal materials and non-metal materials. With a wide range of attachments, it can also be used for mechanical properties testing of profiles and components. In the field of testing of materials such as ropes, belts, wires, rubber, and plastics, which have large deformation and high test speed, they also have a very broad application prospect.

 

In addition, the exterior of the main unit can be equipped with a protective door, which is integrally formed, which is not only beautiful in appearance, but also durable; when the protective door is opened and closed, the ongoing material test can be automatically suspended or stopped and restarted. (more info)

 

WDW-20 desktop microcomputer control electronic universal testing machine

 

The lower space is the test space , the main body of the mainframe is made of aluminum, and the drive and transmission parts are placed at the bottom of the main machine and covered with sheet metal parts.

 
——The afterburning frame is composed of a ball screw pair and a column, wherein the guiding part adopts a linear bearing to ensure smooth running of the beam test process, no vibration, and high coaxiality;

 
——The deceleration part adopts precision imported reducer and synchronous belt deceleration. The whole machine has high rigidity, low noise and no backlash. It can be stretched, compressed and cyclically loaded in the range of 0 to 500N, 1kN and 2kN.

 
——The control part is hung on the right side of the host and has a control button on it, which can be used to control the host, start or stop the test, and also set related parameters such as loading speed, sample diameter, beam return speed, etc. The operation is flexible and convenient. (more info)