This constant-speed tensioning type tester is used for determining physical properties such as tensile strength, compressive strength, bending strength and elongation. Each operation can be done by a single operation. Such ease of operation is highly evaluated. This is a universal type tester featuring multiple functions and a high cost performance. This tester can test various materials used in diversified fields, including papers, plastics, rubbers, textiles, metals, adhesives, paints, glasses, ceramics and compound materials.
Test items : A specific jig (optional) is necessary for each test.
Maximum load : 1 kN (100 kgf), 2.5 kN (250 kgf), 5 kN (500 kgf) Loading position : Tensile and compressive strength tests can
be made between the base and moving
crosshead
Crosshead stroke : 1140 mm
Effective test width : 420 mm
Crosshead speed : 14 speeds
Crosshead speed setting : from 0.5 to 999.9 mm/min. at 0.1
mm/min. intervals
Traversing : manual crosshead lifting and lowering:
low speed (1 mm/min.), mediu speed(50mm/min.),
highspeed (500 mm/min.) for both lifting and lowering
Crosshead speed accuracy : ± 0.2 %
Joe (chuck) : parallel clamping (standard),
pneumatic jaw (optional)
Extension indication : ± 0.000 to ± 999.9 mm digital indication Load cell : 1, 2.5, 5, 10, 25, 50, 100, 250, 500 kgf
Jaw : parallel clamping type: 1, 2.5, 5, 10, 25, 50, 100, 250, 500 kgf Upper fixed crosshead : between this crosshead and movable
crosshead, it is possible to make tensile tests.
Recorder : automatic balance type (DC servo), with a single recording pen (red),
recording method: rapid pen recording (with felt tip pen)
recording paper: effective width 250 mm, 20 mm long
roll paper
Referential standards : JIS P-8113-98, TAPPI T494om-01,
ISO 1924/2
Power source : single-phase 100/110 VAC 50/60 Hz 5A Outer dimensions : 800 x 530 x 1670 mm
Instrument weight : 150 kg
