It is a meter that can measure for 8 points and 16 points simultaneously for strain gauge, strain gauge type converter (stroke detector, load cell, manometer, etc.), voltage output sensor. It uses the A/D transducer to handle the data at the desktop PC or laptop PC. It displays 8-channels at the same time and adjusts the automatic zero point by loading the 4-step low-pass filter.
In particular, SAS97 program can process up to 64 points. And the filtering function for noise removal, average function, and a vibration measuring function of the X-Y, X-T and FFT method are basically provided. It is an electronic measuring device that is applicable to the material tests including tension, compression, bending, shear and others while appropriate for safety diagnosis of bridge, building and the like.
Characteristics
- 16-point digital measurement
- Automatic zero point adjustment and automatic correction
- Acquire PC data by using the 16 bit PCMCIA card or A/D card
- It is small and light that it is easy to use as the portable use
- Large LCD monitor that can display 8 point simultaneously
- High speed measurement : DC - 25kHz
Specifications
1 For strain gauge, sensor for strain gauge (load cell, manometer, stroke
..detector, etc.) and voltage output sensor meter
2 Measurement point : 16점
3 Available gauge resistance : 60 - 1000Ω
4 Scope of input power : 0.100 - 10,000mV/V, 0.001 mV/step
5 Bridge power : ±1V
6 Plane adjustment method
..-Electronic automation
..-Adjustment time: Approximately 1 second to 6 seconds
-6
7 Plane adjustment accuracy : ±2 X 10 Strain
8 Scope of measurement
..- Amplifier : ±5,000, ±10,000, ±25,000,.±50,000 X 10 Strain
9 Output : ±10V
10 Number of responsive measurement : DC-25kHz
11 Low-pass filter : 10, 50, 500, 5,000Hz pass
12 Stability
-6
..- Zero point : ±1 X 10 strain
..- Temperature : ±0.05%/℃
13 Indication
..- Bar Graphic LCD : Bargraphic LCD
..- Monitor : 132.0 X 39.0mm
..- Resolution: 8 points are displayed in digital simultaneously
14 Loaded with 120 ohm switch box for strain gauge (Separate switch box is unnecessary)
15 Input terminal: Select from prototype of 7pin Tajimi Jack or D-Sub 9Pin
16 16bit N.I PCMCIA Card
..- Analog input: 16 input, resolution: 16bit, response speed: 200ks/S
....Adjust each channel independently
..- Digital I/O: 8TTL
..- Counter/timer: 2up/down, resolution: 24bit, maximum frequency: 24MHz
..- Trigger: Digital, 10 PFI line
17 Scope of temperature to use : 0 - 50 ℃
18 Power : 220V, 60Hz
19 Dimension and weight : 434(D) X 250(D) X 185(H)mm, 6.0kg
20 Accessory
..-Standard accessory parts
....1 for each of manual(main body), SAS program manual, AC power cable
..-Selected accessory parts
....Sensor input cable (10m)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.gif){kind=small}
.jpg){kind=small}
.jpg){kind=small}
