This largest domestic STC-EBT 3000/1000 Elastomeric bearing testing machine is an elastic gum for bridge and bearing tester and the elastomeric bearing testing machine. This performs the vertical strain of up to 3000 tons and the horizontal strain of up to 1000 tons. It is a testing machine that is produced by 4-5 companies in Japan and Germany worldwide, and it performs the entirely automatic testing with the software for bearing test. STC-EBT 3000/1000 is very comparable to the products of famous foreign makers in its comprehensive capability including the accuracy, data reproduction and others aspects.
[Dongil Rubber Belt Co., Ltd.]
OutLine
Elastomeric bearing: Vertical stiffness, horizontal stiffness, damper capability roll-out testing
Elasticity base: Compression stiffness, shear coefficient, shear attachment
The entire testing equipment that the foregoing test is performed automatically, and it analyzes the data to output on the form by the KS standard.
Explanation
1 set of load frame
Maximum load :
수직하중 3,000tonf
Horizontal load :
±1,000tonf
Size: Approximately 12,000(W)X3,5000(D) X8000(H)mm
Actual size of sample : 2,000(W)X 2,000(D)X1,000(H)mm
2-axis tester of vertical and horizontal tester
Maximum test pecimen : 1,200(W)X 1,200(D)X400(T)1,500ΦX400(t)mm
Vertical hydraulic
Actuator 1set
Maximum capacity
:3,000tonf
Stroke: 800mm
Maximum speed
: 260mm/min
Accuracy: ±0.5%
Electronic accuracy pressure hauge(350kg/㎠)
Stroke detection : 00mm ( SANTESTof Japan)
Servo valve - Moog 072 Type of US
Swivel Head&Bese(1set)
Vertical hydraulic
Actuator 1set
Maximum capacity: ±1,000tonf
Rod type for combined use of tension and compression
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.gif){kind=small}
.jpg){kind=small}
.jpg){kind=small}
